This is a 0.96″ monochrome OLED display with 128×64 (white) pixels based on the SSD1306 display driver. It is very easy to use and there are a lot of libraries and examples for it on the web.

The display has a 160 degrees viewing angle, and supports SPI and I2C protocols. By using the CS pin you can drive several of these using a single bus.

The board comes as shown in the pictures, with pin headers already soldered in.

Features

• 0.96″ OLED display with 128×64 white pixels
• 3.3V or 5V power supply
• 160 degrees viewing angle
• Supports SPI or I2C
• Reduced dimensions: 27.8mm x 27.3mm x 4.3mm
• SSD1306 display driver

Documents

• Battery indicator using an OLED display
• SSD1306 datasheet